Craftsman ratchet dating

Works well, only complaint is the the selector lever is pretty loose on the shaft, so I am gonna have to figure out something to fix that. Does have the oil port thing on top of the head. Also has a screw cover plate vs a snap ring. And just a plain selector lever, not V shaped. Interior looks good, teeth look nice. Its a 22 tooth ratchet, works well.

Any ideas on age? I am thinking late '40s to mid-late 's. Any helped is appreciated. A quick reading of the site and I did not see a date range for your ratchet but it is prior to The new shifter came out that year. Last edited by Michael; at Thanks for the link Michael. I thought it was kind of a neat older piece. Would it have any collector value?

Would have been great to see both brands back in their day. Crazy to see what price back then look like today after inflation. Due to automation and robotics as well as other advancements in manufacturing, work today is not even remotely compatible to what it was in the past. Even comparing when I went to work in Industry in , it was a lot harder physically and more demanding mentally than it is today. I got the craftsman piece socket set a month ago and holy cow was it the most underwhelming purchase ever. The sockets can is 4 clear plastic bag with no apparent organization, padding, packaging.

We just need to realize Craftsman is not a quality brand any more it is a budget brand for Sear stores, same as husky, Kobalt…. I only wish is another company would make the big socket sets. Where you can buy all sockets in a couple clicks. I looking at you tekton and gear wrench. Some Craftsman tools are still made in the USA, I think these are the larger sets, also there individual sets are made in the USA as I bought the a single socket then a kit with the same socket and the one in the kit was a completely different socket and design!!

I am truly sad to see such an icon essentially sell out, I think I would be able to be some what ok with the manufacture of some tools in china if they were to the same quality as the USA ones. I have a lot of American made RP wrenches stocked up. I also look for old American made Craftsman and others on e-bay.

Perhaps they looked at the success of Harbor Freight and realized that American-made tools are not as important to Americans as they might claim.


  • canada free dating site list;
  • signs youre dating a drunk.
  • funniest dating text fails;
  • intro dating cost.
  • best dating apps gay.
  • free christian dating for over 50;
  • what are some good dating questions!

Sears sucks and craftsman sucks. I was a fierce loyalist and huge collector of craftsman hand tools. For many, many years I collected the old stuff, bought and used the newer stuff. Until one day around I realized that sears had been covertly making craftsman tools in china. So my entire collection years and years of collecting was sold in months on ebay. A bunch of it I gave to my friend, Ryan. I purchased Craftsman tools, and still have all of them. I am now retired and still use those tools.

When my time is up, those tools, and a great many others will pass on to my grand kids.

Register Now

That is the way it used to be. A lot of professionals used Craftsman tools day in and day out. The could not do that with what Craftsman is making today. The quality has gone from top of the line to cheap harborfrieght junk. If I was a mechanic who relied on these tool every day I would be forced to go to snap on, Matco, etall to be assured not to break down mid job.

Just so sad seeing a decent store and product nosediving. There are no many brands that can beat Craftsman.

Craftsman Tools In Retrospect – A 50 Year Comparison

The tool sets are high-quality. It is an American company and the company provides their tools via different online shops all over the world. The tools will durable for the lifetime. The square shoulder is a feature patented by J.

Collecting USA Craftsman Ratchets: Rare to Common

Williams in the s see patent 2,, and is not known to have been used by any other manufacturers. The patent notice refers to patent 2,, , filed by W. Johnson in and issued in This patent describes a locking mechanism for adjustable wrenches, actuated by pushing a locking pin visible in the photograph through the thumb knurl. The reverse shank also shows a forged-in code "L" next to the hole. The upper inset shows a side view of the wrench, and a close look shows the square shoulder for the sliding jaw and keyway. The square shoulder was a patented feature of the J. Williams adjustable wrenches, and is not known to have been used by any other manufacturers.

This wrench can be identified as Williams' production by the square-shouldered keyway, and the stamped "JW" code further confirms the maker. The forged-in "L" code has also been observed on J. This particular wrench is believed to have been purchased new in the late s to early s, a time before Craftsman began marking model numbers on its tools. The next figure shows a similar wrench with a Craftsman model number. The shank is stamped "Forged" on the front with "Made in U. The upper inset shows a side view of the wrench, with the square shoulder visible on the sliding jaw and keyway.

The manufacturer associated with the "N-Square" code is not yet known. This code has also been noted on a Dunlap Punch shown in another article.

Vintage Craftsman Ratchet | eBay

The overall length of the handle is The finish is chrome plating. The patent notice refers to patent 2,, , filed by R. Vose in and issued in , with assignment to Moore Drop Forging. A close comparison with the Williams No. The small forged-in "T" code to the left of the panel is one of several forge codes used by Williams the others include B, II, O, and V and is not interpreted as a Craftsman manufacturer's code.

The lower inset shows the forged-in "P" code in a circular depression on the inside of the handles. The rope-banded handles and P-Circle code indicate production by Wilde. The body is stamped "Made U. The construction of the wrench uses symmetrical stamped steel formed panels held together by rivets. Ratcheting box wrenches in this design were listed in the Craftsman tool catalogs as early as Sears continued to use the Dunlap brand for economy tools into the early s, but by the Craftsman catalog no longer included Dunlap tools.

The front panel also has a forged-in code "X" at the left and "LC" at the right end, seen as a close-up in the middle inset. Note in particular the gently-sloped depressed panels and the increased width of the shank after the offset. The forged-in "LC" code is believed to represent "Lectrolite Corporation".

The front panel also has a forged-in code "T" at the left and "LC" at the right, shown as a close-up in the middle inset. Note in particular the gently-sloped depressed panels and the increased width of the shank at the junction with the box end. The shank is also marked with a forged-in Y-Circle logo, visible at the right near the hanging hole. The forged-in Y-Circle logo is believed to be the manufacturer's code, but the maker has not yet been identified. In more recent years Sears has used its own name for a line of economy tools, similar to the Dunlap tools of earlier years.

The Japanese maker associated with the "BF" code has not yet been identified. The "BF" code can also be found on Craftsman wrenches, often with a marking for molybdenum alloy steel. Recent changes to this page: Fixed bitrot with book preview. Added Craftsman Combination Pliers. Added Craftsman Battery Pliers.

Minor reorganization, expanded discussion of origin of modern era. Added Craftsman Hose-Clamp Pliers. Added Craftsman 4-Position Waterpump Pliers. Added a Craftsman "V" Battery Wrench. Added a Craftsman Battery Pliers. Added Craftsman Brake Spring Pliers.

Added a Dunlap 10 Inch Adjustable Wrench. Added a Craftsman Pin Punch. Page created, not much content yet. Mid to Late s. Early Craftsman "V" No. Late s to s. Late s to Early s. Alloy Artifacts Web Search. Introduction In an earlier article we reviewed the Early Craftsman Tools of the late s through mid s, and a separate article covered the Craftsman "BE" and H-Circle line of sockets in greater depth. Origins of The Modern Style By the early s the Craftsman brand was about 15 years old and had become highly successful. It would seem that Sears had three choices: Find an existing manufacturer with a broad line, and willing to act as the contract maker.

Ask potential manufacturers to submit prototype tools as a bid for the contract. Develop the design and specifications for the tools themselves, and then seek a contract maker. Tracking "Maker V" Since we've made the "V" series tools the centerpiece of this article, we'll begin by establishing the identity of the manufacturer of the "V" series. Patent Clues The first break in identifying "Maker V" came via the patent notice on a "V" series ratchet, specifically for the Haznar patent 3,, Inventor Filed Issued Description Examples 2,, Manufacturing Codes Although "Maker V" was the dominant producer of Craftsman tools during this era, many other companies supplied tools as well.

Found on Craftsman Locking Adjustable Wrench. Craftsman Ratcheting Box Wrench. Stamped marking on adjustable wrenches. Stamped code observed on primarily on pliers, e. Usage appears to overlap with "A. Forged-in code observed on economy wrenches, e. Dunlap Offset Box Wrench. Found on chisels and punches, e. Also noted on Craftsman 4-Position Waterpump Pliers. References and Resources Photographs and observations of particular tools are based on items in the Alloy Artifacts collection.

Catalog Coverage We have fairly extensive catalog coverage for the Craftsman post-war production, as summarized in the table below. Year Format Notes Lists "Arc-joint" tongue-and-groove pliers in Craftsman and Dunlap brands. Rear cover shows "Arc-joint" Craftsman pliers with P-Circle code. Prelude to the Modern Style In this section we'll look at some early examples of Craftsman "modern era" tools that we believe were actually part of an "audition" process leading to the selection of the contract manufacturer.

The overall length is 9. The overall length is 6. The cadmium finish suggests a manufacturing date in The overall length is 5. The opening sizes were measured at 0. Sockets and Drive Tools We have an extensive collection of Craftsman "V" series sockets and drive tools and will be adding them to this section, as time permits. V-Shaped Shifters In the Craftsman ratchet line adopted a distinctive V-shaped shift lever, based on a design described by patent D, , issued to R. Quick-Release Ratchets In Sears began offering Craftsman ratchets with a convenient quick-release button, based on a design described by patent 3,, , filed by P.

Quick-Release Dual-Pawl Ratchets In the late s Sears began offering Craftsman ratchets with a dual-pawl mechanism for ultra fine action, combined with a quick-release button for extra convenience. Pliers and Cutters As Craftsman tools entered the modern era, Sears adopted the "Nested Diamonds" pattern as their standard gripping pattern for pliers.

Shop by category

The manufacturer of the B-Circle code has not yet been identified. The rope-banded handles and forged-in "P" code indicate production by Wilde. The later production by Danielson was marked with an "LC" manufacturer's code. Adjustable Wrenches In the post-war years Craftsman adjustable wrenches were supplied by J.

Craftsman "Y-Circle" 8 Inch Adjustable Wrench The next figure shows an example of a series of adjustable wrenches offered during the s, notable for the distinctive placement of the hanging hole in the interior of the shank, rather than at the extreme end.